|
"...This is the fastest, easiest and best way to improve traction of any tire, street or race. Just inflate into the tire valve stem and away you go…"
* No need to dismount tire or remove from vehicle
* No wasted time rolling or painting on other liquid treatments
* Fills the tire like Fix-A-Flat® in just a few minutes. That's it!
* UNDETECTABLE! Passes tire tests
* Works on both Race or Street Tires, even with grooves
* Works very well on hard or soft tires
* Significantly increases corner speeds and reduces lap times
* Increases tire life up to 50%
* Tires run up to 27 degrees cooler
* Reduces tire blistering
* Works on asphalt and even dirt surfaces!
* Begins to work as soon as tires warm up and will not go away
even after 100 miles of hard racing
* Can provide enhanced adhesion up to 200+ miles on the street
* Circle * Drag * Road Course * Street * Motorcycle * Dirt * Rocks
It's the easiest tire treatment to apply!
1. Remove air from tire
2. Attach hose from can to tire valve stem
3. Spray entire contents of can into tire
4. Re-inflate tire to desired operating pressure
5. Roll tire as much as possible to distribute internally
This can be done by driving, car jacked up, on a tire
balancer or just rolling around the shop floor.
________________________________________________
STREET/RACING TIP: If you drive your car to the track and rather not "waste" your treatment on the road during the trip there, this handy product allows you to treat your tires right at the track in minutes… or maybe just outside the gates before you drive it! This is easier than changing tires at the track and keeps you out of the "racing tire" class, while giving you near the traction of racing tires.
|
|
