Effective, Real world, Race & Street Proven Parts & Accessories
CHECK OUT BILLET ALUM BREATHERS (click right)
CHECK OUT 302/351 VALVE COVERS (click right)
SUPER TALL ALUMINUM BIG BLOCK FORD VALVE COVER Very UNIQUE!For Ford 429-460 engines. Make your already big block look like one of the giant Hemi's of the 60's! Make you engine look like no other big block on Earth, and resemble the 60's era 427 "pentroof" covers! These strong aluminum covers are 17 lbs a pair & made from A-356 Aircraft aluminum and are light yet seal perfectly with its thick rigid casting and solid 5/16" thick mounting flange. Internal baffles reduce oil spray through the breathers. These are the tallest & biggest covers out there at over 5-1/8" tall! Well over 20% taller than most of the other so called "tall ones" out there! Do not confuse these with the others you've seen that might appear similar to these! Natural aluminum finish can be painted with the fins polished, or the entire cover polished or chromed. (slight clearancing may be required for new SCJ alloy heads) CLICK HERE TO SEE PROCEDURE
$419.00/pair natural aluminum Super-Tall valve covers (or mix & match below...) + $115/prwrinkle black powdercoat (or) + $145/prKrome-Coat shiny silver powdercoat + $135/prHand Painted valleys between fins (+ $175/pr on Polished or Chromed finish) + $65/pr Hand sanded fins + $199/pr Hand polished fins CLICK to SEE FINISH OPTIONS $699.00/pair polished aluminum Super-Tall valve covers (or add hand painted fins...) $899.00/pair chromed aluminum Super-Tall valve covers (or add hand painted fins...) Neoprene reusable gaskets $26.95/prClick to SEE Super-Tite Breather Grommets $9.95/ea
* = polished fins not available on black or chrome coated covers - (specialty finishes other than natural may take 2-6 weeks) no returns accepted on these covers unless for exchange due to manufacturer defects. Requires smaller allen head bolts to fit.
TESTIMONIAL: "...Just wanted to let you know that the Valve covers arrived today. May I just say WOW!!! They are the sweetest things I've seen. I'm so glad i got them. Can't wait to put them on!…" -Frank G. TESTIMONIAL: "...Got the valve covers... They came to the office yesterday and they look awesome! I had been searching for them for quiet some time with no luck. I had given up until I saw your (ad)... Thanks again. Can't wait to get them on… They are huge..." -Steve A.
These illustrations show a direct comparison to other valve covers in the same car on a 460 big block Ford in an A/C Cobra
Below is a direct side by side comparison between the S/T covers against one of the tallest & biggest valve covers available (center). As you can see, there is absolutely NO comparison what so ever!
Below, "another" manufacturer of similar looking valve covers, but WITH huge 2" spacers needed. Note how small the STILL look compared to the S/T covers!