Effective, Real world, Race & Street Proven Parts & Accessories
Fused Distribution block 4-6 power in / 4-6 out
This unit has 4 (or 6) individual main power wires in, and 4 (or 6) individual fused branches out with connections to secure wires using individual male blade terminals for plug in wires.
ATC style fuses sockets accept a combined 50/65 amp total load capacity. Clear cover with rubber o-ring seal snaps over fuses and ears mount to flat surfaces. Perfect for setting up fuse distribution sub panels downstream for additional circuits
4-Socket Fuse Distribution block f/ATC fuses w/Male spade connectors-50A (4) Male spade connectors in (4) Male spade connectors out
6-Socket Fuse Distribution block f/ATC w/ Male spade connectors-65A (6) Male spade connectors in (6) Male spade connectors out
Fused Distribution block 1 power in / 6 branches out
This unit has one main 8 gauge power wire coming into the block and distributes power to 6 individual fused branches out with connections to secure 6 wires using individual screw posts for ring terminal end wires.
ATC style fuses sockets accepts a combined 65 amp total board load capacity. Clear cover snaps over fuses and mounts to flat or uneven surfaces due to the raised base design.
Perfect for setting up main fuse distribution panels. Use multiple blocks for additional parallel circuit branches.
6-Socket Fuse Distribution block f/ATC fuses Screw terminal posts-65A (1) 8 gauge wire in (6) Screw posts out
Fused Holder - Inline This handy fuse holder is insulated by a rubberized water tight housing and sealed off with a rubber water resistant cap to protect the standard ATC or MAXI style blade fuse inside. Simply cut the looped wire and insert into your existing circuit and it is now safely fuse protected! (fuse not included. Available on this site separately)