Effective, Real world, Race & Street Proven Parts & Accessories

The Snakestopper™ High Performance Front and Rear Brake rotor kit will STOP YOU IN YOUR TRACKS!

** DIRECT BOLT ON - NO MODIFICATIONS NECESSARY **
       For early chassis numbered Superformance® Cobras

These fully machined vented, slotted, cross drilled and chamfered rotors will significantly increase stopping power, and maintain a cool brake system even under the most severe braking conditions… both on the Track and on the street
!

The black chromate metal coating (
these are not just powder coated) protects the non-wear surfaces and polishes to a chrome like shine when the brake pads are bedded in. The right and left hand directional rotors are designed to evacuate unwanted brake dust from being captured between the pad and the rotor surfaces and is channeled outward clear of the braking surfaces for maximum performance. The polished surface and the black reliefs also make for a striking impressive visual appearance. The inner and outer bearing races are already installed into the hub, as well as our genuine performance wheel studs made just for knock off adapters are also installed.

The premium hub service kit is intended to completely renew your front inner hub assembly. Included are the inner and outer bearings, thrust washers, spindle nuts, nut locks, cotter pins, inner hub seals and outer hub caps.

The High Performance braided Stainless Steel Teflon lined brake hose kits for the front and rear has all the attachment hardware and fittings  supplied for the front Granda and rear Thunderbird calipers. The increased rigidity of the firm Stainless Steel hoses virtually eliminates the swell of other hoses which increase brake pedal firmness and increases breaking pressure and performance. Included are the front and rear hoses, inner AN to brake line adapter couplers, frame clips, front and rear AN banjo fittings, banjo fitting bolts and aluminum sealing crush washers.


FITS Superformance Cobras Chassis # 650-ish & earlier - Will not fit others

$975.00
62 pcs:

/kit  Snakestopper Full Kit Brake Rotor, Bearing Hose Kit
* For 5 on 4-1/2" bolt pattern - 11" front / 10" rear rotors
Includes front and rear and right and left side rotors. Front complete bearing, seal and hardware kit. Front and rear brake hoses and complete attachment hardware kit. Our genuine performance wheels studs made for knock off adapters are already installed along with the front hub bearing races.