Effective, Real world, Race & Street Proven Parts & Accessories

This upgrade addition solves the problem of the front sway bar frame gap issue and improves handing by increasing sway bar performance and quickening response. PROBLEM-1: Superformance® Mk-III Cobra's front sway bar frame mounts have raised bosses and special extra tall rubber frame bushing to compensate for this anomaly. However, when changing to aftermarket polyurethane bushings the bushing height is less than the factory bushing and therefore when the sway bar is deflected, instead of the sway bar twisting as ity should to reduce body roll, the bushing and sway bay moves up and down in the U-bracket instead, and for that in initial period the sway bar is not working at all. PROBLEM-2: If you changed your factory sway bars to the improved GTP™ sway bar package,

the kit bridged this gap with a thin flat base plate. However, the suspension compression under the stress of cornering can flex and bend this thin base plates thereby moving the sway bar up and down over this gap, instead  of transferring that force into a torsional motion needed to control body roll and allow the sway bars to deliver maximum performance and optimum handling.

Our complete solution will ELIMINATE any undesirable sway bar flex, and allow the suspension and sway bar to deliver the maximum performance it was designed to. With just a couple minutes of installation time, your suspension we respond quicker, perform better, firmer & more controlled. Handsomely powder coated to match the frame for a discreet installation.

$19.95/pr.

Billet Machined Alloy
Aluminum Base Plates w/
Integral Frame Support
for all Superformance Mk-III Cobra front sway bars

This upgraded sway bar base plate fits all Superformance® Mk-III's equipped with Stock or R/T front Sway Bars

NOW INCLUDED IN THE NEW R/T SWAY BAR KIT -  FREE !

This Upgraded Machined Billet Aluminum Alloy Base Step Plate is custom made to fill the gap for aftermarket polyurethane bushings on the original stock OEM bar... as well upgrade the thin flat plate supplied in the aftermarket GTP™  sway bar package. Our new Step Plate is TWICE the thickness and strength where it counts and supports the center of the bushing completely eliminating any possibility of unwanted sway bar movement.

IF USING THE ORIGINAL
SUPERFORMANCE FRONT SWAY BAR

IF USING THE UPGRADED
GTP FRONT SWAY BAR