TRANSMISSION                                               _
NEW T.C.I. ALUMINUM TRANSMISSION PAN: For Chrysler 727 automatic transmission. Deep cast aluminum finned pan increases fluid capacity by 2 quarts, improves cooling and strengthens transmission to reduce deflection at the pan rail. Includes pickup, screen, gaskets and hardware. Brand New in the box. TCI Pt# 128000. New would cost $200.
SELL FOR $135.  (Shipping $16 /48 states)
INQUIRE HERE pu100901- SE-Wisconsin   < or >  SEE ACTUAL PHOTO HERE!

NEW MANUAL TRANSMISSION SYNCHROS: For Borg Warner transmission. New synchro set of 4 still sealed in the package. Develco Pt# D935-1. New would cost over $200.
SELL FOR $65.  (Shipping $12 /48 states) 
INQUIRE HERE pu101001- SE-Wisconsin   < or >  SEE ACTUAL PHOTO HERE!

FORD C-6 AUTO TRANS: With 7" tailshaft for Ford 4x4 transfercase. *Rare* HEAVY EXTERNALLY RIBBED case. Fits 351-M, 400, 429 & 460 engines. Good physical. Usable as core or ready for rebuild.
SELL FOR $475. (Shipping $125 /48 states) 
INQUIRE HERE xx070699A- SE-Wisconsin

USED H.D. OIL COOLER AND FAN: Hayden super high volume, high capacity heavy duty oil cooler. Free flow 6 tube headered design results in minimal restriction with maximum cooling. Will handle engine oil or transmission oil cooling. 3/4" NPT threaded fittings. Measures 1.5" thick . 18" long / 12.5" tall. Electric fan measures 12" diameter with 10 blades. Very good condition, just a little dirty. Able to easily handle a 700 hp. engine or tranny. No cracks,  no leaks, no welds, no repairs.  New would cost $300.
SELL FOR $139. (Shipping $17 /48 states)
INQUIRE HERE xx103003bb- SE-Wisconsin   < or >  SEE ACTUAL PHOTO HERE!

DIFFERENTIAL                                                _
NEW 71-77 BRONCO FRONT AXLE SHAFT: 30 spline "Short side-inner" custom axle shaft for a direct slip in fit for the early Broncos Dana 44 fronts. "Brute Force" brand shafts are larger diameter, have bigger u-joints and is much stronger than stock. Brand new, never been used or installed. Retail would cost $220 /ea.  Only have 3 to sell. No other ones available.
SELL FOR $189/ea. (Shipping $14 /48 states)
INQUIRE HERE pu110803b SE-Wisconsin   < or >  SEE ACTUAL PHOTO HERE!

NEW SUPER HEAVY DUTY DANA 60 FRONT AXLE SHAFTS: Outer axle shafts for Ford Dana 60. 3 times stronger than a OEM Dana 60 outer shaft. Have been used in trucks weighing 6,000 pounds with 1200hp with no breakage at all! 35 spline, custom machined from a billet piece. Not pressed or welded together. Stress points eliminated by a two piece seal surface flange and elimination of the lock out "C" clip with a unique internally threaded end. Polished, deburred, stress relieved, shot peened, Magnafluxed and cryogenically treated material. These are not OEM factory parts! Needs only a 35 pline lockout convert over. Never been used or installed. Retail would cost $800 / pair.
SELL FOR $450/pair. (Shipping $18 /48 states)
INQUIRE HERE pu121500 SE-Wisconsin   < or >  SEE ACTUAL PHOTO HERE!

DANA 60 POWERLOC DIFF REPLACEMENT CLUTCHES: For Dana 60 PowerLoc posi differential. New clutches and steel plate kit with lubricant additive and instructions- NEW in the box. Brand New! Spicer Pt# 70705x Retail would cost $90.
SELL FOR $69. (Shipping $9 /48 states)
INQUIRE HERE pu070699E- SE-Wisconsin   < or >  SEE ACTUAL PHOTO HERE!

GM 12-BOLT DIFF REPLACEMENT CLUTCHES: For Aftermarket EATON clutch posi in a GM 12-Bolt differential using 4 pre-load spring style case. New clutches and steel plate kit- NEW in the box. Retail would cost $129.
SELL FOR $89. (Shipping $9 /48 states)
INQUIRE HERE pu032104- SE-Wisconsin   < or >  SEE ACTUAL PHOTO HERE!

NEW "MISSILE PROOF" 40 SPLINE FORD 9-INCH DIFF: The ultimate in rearend technology and strength. A 69 Series Street-strip Richmond 5.13:1 ring and pinion mounted to a custom machined BEP Chromemoly 40 SPLINE spool with Moroso Moly ring gear bolts. Huge Daytona pinion bearing set with gigantic 3.25" carrier bearings. Solid machined crush sleeve spacer. Just add axles and a center section and you're in business! Brand new, perfect condition and never been used and assembled just for photo purposes as seen here. Retail would cost $850 / set.
SELL FOR $695/set. (Shipping $28 /48 states)
INQUIRE HERE yy102903e SE-Wisconsin   < or >  SEE ACTUAL PHOTO HERE!

BRAND NEW FORD 9" GEARSET: 4.11:1 ratio ring and pinion set. Brand new in the box. Made by BEP performance gears. Brand new condition. Retail would cost $239.
SELL FOR $179 (Shipping $13 /48 states)
INQUIRE HERE pu101503 SE-Wisconsin   < or >  SEE ACTUAL PHOTO HERE!

BRAND NEW FORD 9" INSTALL KIT: Complete install and set up kit brand new in the box made by BEP performance. Includes carrier bearings and races, pinion bearings and races, crush sleeve, shims, ring gear bolts, pinion seal, pilot bearing, pinion support o-ring, pinion yoke nut and marking compound. Brand new condition. Retail would cost $169.
SELL FOR $129 (Shipping $9 /48 states)
INQUIRE HERE pu101503b SE-Wisconsin   < or >  SEE ACTUAL PHOTO HERE!

NEW "TAKE-OUT" DANA 30 RING & PINION GEARS WITH OPEN DIFF: Fits Jeep TJ Dana 30 front and includes 3.07:1 ratio factory take-out ring and pinion gears and an open differential assembly, mounted and ready to go. Only used a few miles out of the factory door. Excellent condition. New would cost $485.
SELL FOR $165 for ALL!! (Shipping $18 /48 states)
INQUIRE HERE xx121400b SE-Wisconsin   < or >  SEE ACTUAL PHOTO HERE!

USED DANA 44 RING & PINION GEARS WITH OPEN DIFF: Fits Dana 44 standard rotation front or rear. Includes 3.50:1 ratio ring and pinion gears and an open 30 spline differential assembly, mounted and ready to go. Very good condition. New would cost $395.
SELL FOR $155 for ALL!! (Shipping $18 /48 states)
INQUIRE HERE xx101603 SE-Wisconsin   < or >  SEE ACTUAL PHOTO HERE!

BRAND NEW MINI-SPOOL FOR FORD 9": For Dana 31 spline Ford 9" open style carrier. Hardened alloy mini spool unit replaces only the center spiders gears for the ultimate posi traction rear end. Brand new, never installed ot used. Retail would cost $60.
SELL FOR $49. (Shipping $9 /48 states)
INQUIRE HERE pu032104- SE-Wisconsin  < or >  SEE ACTUAL PHOTO HERE!

USED GM OPEN DIFFERENTIAL: Carrier for GM 7.5" rear ends with 26 spline axles. Fits gear ratios 3.23 and down. Good condition. New would cost $245.
SELL FOR $45. (Shipping $13 /48 states)
INQUIRE HERE yy110703b SE-Wisconsin   < or >  SEE ACTUAL PHOTO HERE!