Effective, Real world, Race & Street Proven Parts & Accessories

FOR TRANSAXLES AND MODERN TYPE TRANSMISSIONS

"Ultra-Shift T/A is NOW MADE FOR TRANS-AXLES! !!!!!!
...and is unlike any Trans-Axle Lubricant you have ever experienced, it is 'thee' Ultimate. Nothing smells like it, nothing looks like it's deep fluorescent color, nothing works as good as this and nothing come even close to it's performance...  Nothing!"

High performance manual trans-axles do not always shift as smooth and as sure as they could. Our
Ultra-Shift High Performance Trans-Axle Lubricant is specifically intended for high strength manual trans-axles which typically exhibit a less than desirable "smooth" transition from one gear to another. If your trans-axle feels "notchy", then this is your best bet! Get silky smooth and quicker shifts while enjoying cooler operating temperatures from your high performance trans-axle instantly by "pouring in the performance" with Ultra Shift T/A. Excellent for use in high speed trans-axles desiring quick shifting characteristics.

Each bottle of Ultra-Shift T/A is meticulously prepared and filled to the most stringent and accurate specifications, one at a time.

Ultra-Shift T/A Synthetic Manual Trans-Axle oil has been specially formulated to survive ultra-severe punishment and abuse of high performance street and competition applications.

Ultra-Shift T/A is designed to withstand and provide superior protection against tremendous heat, high speed, extreme pressure and brutal torque shock-loading conditions. Adheres to metallic surfaces and will not drain off.

Finally an oil to make newer car transmissions shift better, and specifically for the transaxles in GT-40's, Panteras & Corvettes!

(click above)
CHECK OUT
LUBRICANT
FOR TREMEC, TOPLOADER & OLDER NOTCHY
TRANSMISSIONS

(click above)
CHECK OUT
LUBRICANT FOR DIFFERENTIAL

$29.95

ULTRA-SHIFT T/A

High-Performance Trans-Axle
Lubricant
-Synthetic Gear Oil  Based Fluid 32 oz. - 1 Qt. bottle
usually 2.75 - 3 quarts fills most trans-axles

Ultra-Shift T/A Synthetic gear oil based lubricant is thermally stable and engineered with all the necessary extreme cooling and beneficial high pressure additives included to make this the most potent lubrication package possible.

Ultra-Shift T/A
incorporates the unique properties of enjoying the low viscosity and low resistance of Automatic Trans-Axle fluid while taking advantage of the lubrication adhesion and cooling benefits of 140 weight gear lube.

The
Ultra-Shift T/A lubrication package contains the following additives:

- Extreme Pressure Additive
- Lubricity Improver
- Heat Dissipation Additive
- Adhesion Improver
- Low Temp Viscosity Enhancer
- Corrosion Inhibitor

Ultra-Shift T/A is designed to be compatible with all types of seals and will not cause seals to leak.


    Excellent for use in all...
- Manual transmissions
  - Transfer cases
    - Transaxles &
       Differentials
with clutches

DO NOT USE ANY ADDITIVES WITH THIS PRODUCT !

OK TO USE IN DIFFERENTIALS WITH CLUTCHES

Ultra-Shift T/A provides these benefits:

*  Intended to be
the absolute best total lubricant
    package specifically for high performance

    manual trans-axles & differentials
-period !

*  Greatly improved
silky smooth shifting

*  Significantly
reduced operating temperatures

Withstands brutal high heat situations

Absorbs extreme pressure & severe shock loading

*  Notably
reduced gear and bearing noise

*  Significantly
improved gear and bearing life

Reduced friction and power loss

Tremendous lubrication adhesion properties

Superior lubrication film strength barrier

Unaffected by moisture & condensation

Safe for all trans-axle bearings, bushings, gears,
    synchros & seals and will
not cause seals to leak

Allow 500 miles for the product benefits to take full effect...

The below is a VERY Rare occurrence, but if it does happen know that we have you covered!

Ultra-Shift T/A
works so good, that in some transmissions other than the ZF or RBT and Quaife, this incredible lubricant can actually be "too" slippery! If that is the case where the shifting is smoother but wants to grind before going into gear, the simple and very effective solution is to dilute the powerful super slick additives in the Ultra-Shift T/A with our EPL 75w90 Gear Oil (CLICK HERE) until you achieve the absolute perfect shift. Typically a 2:1 ratio is the most you will ever need to add.

To do this, follow this example... Say your transmission has a 3 quart capacity. To effectively dilute the slipperiness of
Ultra-Shift T/A to 2:1, drain out 1/2 of the transmission's capacity (in this case, 1.5 quarts). Then fill back up again with the 75w90 EPL Gear oil and the fluid will mix as you drive. It may take a while for the super slick film provided by the Ultra-Shift T/A to wear off, so give it several hundred miles to take full effect. You can dilute the Ultra-Shift T/A Less initially, then keep adding the EPL as needed to get the best shift possible.

EPL is not just a standard gear oil, and adding any other oil in this process will not achieve the same results.